Vibration Isolation Case Studies

DVIA-MB1000 serial 191121R3 (project P150) for Helios G4 UC via channel partner; END USER Southern University of science and technology per the summary table with installation place Shenzen, 1st floor. Internal-program plots align with **Z axis**, **X axis**, and **Y axis** headings in the Word document. The decorative graphic on the centered setup-heading paragraph is not republished.

UB1000 (S/N 190923R7, P16 remote tuning worksheet) vibration check after active mounting on ZEISS EVO10 at 高意通讯（深圳）有限公司 6th floor, Shenzhen, delivered. Operator Kim, Doohyun; setup and report 2020-08-24. Publication includes the UB1000 setup photograph, 2/5/10 Hz transmissibility summary (Z/X/Y), and UB1000 internal-program Z/X/Y axis plots.

DVIA-MB1000 serial 190109R5 (project P109) for Zeiss Sigma 500 at Suzhou Weixin Electronics (1st floor), remote tuning worksheet dated 2020.08.20. VC-Class summary grid cells are blank in the source; MB1000 internal-program Z, X, and Y screenshots follow Word document order; the decorative raster directly under the centred setup title line is not republished.

DVIA-MB1000 serial 190109R5 (project P109) for Zeiss Sigma 500 via channel partner; END USER 苏州维信电子有限公司 (MFLEX Suzhou) and installation site Suzhou, 1st floor. Internal-program plots follow **Z axis**, **X axis**, and **Y axis** headings as in the Word document. The smaller JPEG embedded on the centered setup heading block (rId8 / image1.jpeg) is treated as header decoration and not republished. The source worksheet has no Reference / Generic Vibration Criteria section.

DVIA-MB1000 serial 200715R3-1 (project P186) reported via /channel partner at Zhejiang Zili Co., Ltd., Shaoxing. The setup table lists Target equipment Zeiss sigma 500 while the Overview block’s Equipment Model line reads Thermo scientific Scios 2 — both lines are reproduced verbatim from the Word form. Figures follow Z axis, X axis, and Y axis as in Word; the ornamental photo directly under the centered setup heading is not republished.

DVIA-MB1000 serial 200319R2 (project P164) for Zeiss G300 with END USER TCL华星光电技术有限公司 (CSOT affiliate in the workbook) on the /channel-partner worksheet dated 20.08.17. Operator Munho Noh; place of installation and place of measurement lines read Shenzen exactly as in Word. Published internal-program screenshots follow the Z axis, X axis, and Y axis subtitles in workbook order after the worksheet heading line; the decorative title-band graphic under MB1000_200319R2(P164) Set up is omitted from the gallery.